Nad Phono Preamp Pp2 Manual May 2026

: Connect the external 24V power supply to the PP 2 and plug it into a wall outlet. A green LED on the front panel indicates the unit is powered. 2. Technical Specifications

: Never connect the PP 2 to an input marked "PHONO" on your receiver, as this will cause severe distortion. Nad Phono Preamp Pp2 Manual

: Verify that the PP 2 is connected to a standard Line-Level input and not a Phono input on your receiver. Phono Preamplifier PP 2 - HiFi Gear : Connect the external 24V power supply to

: Use RCA cables to connect the PP 2 Output to a Line-Level input (e.g., CD, AUX, Tuner) on your receiver. Technical Specifications : Never connect the PP 2

: If your turntable has a separate ground wire, secure it to the GND thumb screw on the back of the PP 2 to minimize hum.