: Fully retract the boom. Turn the potentiometer counter-clockwise until it stops to reset the "zero" point.
: Set the boom between 0 and 5 degrees. Use an inclinometer to verify the actual physical angle. n_031.mp4
Below is a guide for the assembly and maintenance procedures typically associated with these technical standards. 🏗️ PAT/Hirschmann Crane System Guide : Fully retract the boom
: If replacing the system chip, ensure the notch faces the correct direction to avoid frying the board. Use an inclinometer to verify the actual physical angle
The filename n_031.mp4 frequently appears in technical contexts related to crane systems, specifically associated with documentation for the DS 350 and EI 65 series Load Moment Indicators (LMI).
The length sensor measures boom extension via a potentiometer in the cable reel.
The angle sensor ensures the crane's boom is at the correct pitch for safe lifting.