Isis-proteus-7-7 May 2026

Enter a (e.g., VCC, GND) and a Pin Number that matches the physical footprint. Create the Device :

: For digital testing, you can use the Digital Pattern Generator instrument to "generate" signal patterns (pieces of data) for your simulation. Make a New or Custom Part in Proteus -Step by Step Guide isis-proteus-7-7

Use the to draw a box around your entire drawing (box and pins). Right-click the selection and choose Make Device . Configure Device Properties : Enter a (e

Click to finish. Your new "piece" will now appear when you search the library with the Pick from Library (P) button. Alternative Methods Right-click the selection and choose Make Device

: Click Next to link a PCB footprint (from ARES) if you plan to design a board later. Save to Library :

Place pins on the edges of your 2D box. You can rotate them (using the keypad + or - ) so the connection point faces outward. : Double-click each pin to open the Edit Pin dialog.

In Proteus ISIS 7.7, "generating a piece" typically refers to that isn't already in the standard library. Step-by-Step: Generating a New Component Follow these steps to create a custom schematic part: Draw the Component Body :