Iris9600hd-13_2_16_recuperar.zip May 2026

Release the button once the screen displays an "Update" or "Read USB" progress bar.

If prompted for a PIN after recovery, the factory default is usually 0000 .

To use this file, you must follow a "forced update" method, as the standard menu might be inaccessible if the device is bricked. Format a USB stick (8GB or less recommended) to FAT32 . IRIS9600HD-13_2_16_RECUPERAR.zip

The "RECUPERAR" (recovery) firmware is a specific system image used to unbrick or restore the IRIS 9600 HD satellite receiver when it fails to boot or displays errors like "Load" or "Ident Error". 13.2.16 (Release date: approx. February 2016).

This document outlines the purpose and recovery procedures for the firmware file IRIS9600HD-13_2_16_RECUPERAR.zip . 🛠️ Purpose of the File Release the button once the screen displays an

on the front panel while switching the power back on.

Extract rom.bin from the .zip file and place it in the of the USB drive. Ensure the file is named exactly rom.bin . Flash Process: Format a USB stick (8GB or less recommended) to FAT32

This file is specifically for the 9600 HD series. Using it on other models (like the 9700 or 9800) will cause a version mismatch.