: Roll out the pipe according to your plan. Use ground staples (pegs) every meter to keep the line in place.
: Available in 4mm (for small pots/areas) or 13mm (standard for garden beds). Drirezip
: Connect the tube to your main water source or 13mm poly "header" pipe using a tee or elbow fitting. : Roll out the pipe according to your plan
: Before plugging the ends, turn the water on for a minute to flush out any dirt or plastic shavings. : Connect the tube to your main water
Before buying your pipe, sketch your garden to determine how much tubing and which fittings you'll need.
: Insert end plugs into all open pipe ends and secure them. 4. Maintenance & Tips
: Always use a filter at the tap. If emitters become blocked, you may need to soak the affected section in a mild vinegar solution to dissolve mineral buildup. DIY GUIDE - Pope Irrigation