: Turn off the TV or disconnect the power cable from the controller board.

: Move the extracted .bin file directly to the root directory of the USB drive. Do not put it inside any folders. 3. Installation (Flashing) Process

: If the image is distorted, you may need to adjust the LVDS map or panel voltage via the service menu (usually accessed via a remote code like Menu + 1147 or Input + 2580 ).

: Unplug the flash drive so it doesn't try to re-flash on the next boot.

: Ensure the 1440x900 matches your physical screen resolution to avoid a "No Display" or "Out of Range" error after flashing.

: The download will be a .rar or .zip archive. Use a tool like 7-Zip or WinRAR to extract the actual firmware file (usually named SI6703.bin or similar). 2. Prepare the USB Drive

: The LED indicator light on the board/keypad will typically start flashing rapidly (usually red/blue). This means the firmware is being written to the chip.

: Use a small USB flash drive (2GB to 8GB is ideal) formatted to FAT32 .