Depending on the state of your receiver, use one of these two methods: Method A: USB Recovery (Best for Boot Stuck)
: Look for files named SR-6969HD_Original_Dump.rar or SR-6969HD_W25Q32.bin . 2. Flashing Methods
the flash dump file or the latest official software to gx_rom.bin . Insert the USB into the powered-off Starsat 6969HD Download FLASH DUMP ORIGINAL STARSAT 6969HD (W25Q32) rar
: Check the Starsat Software Support page for general firmware updates.
To download and install the original flash dump, you'll need the correct .bin file and an external programmer or a specific recovery method if the device is stuck in a boot loop. 1. Download the Flash Dump Depending on the state of your receiver, use
If your device is stuck on "Boot" or "On" after a bad update, you may be able to recover it without opening the box: a USB drive to FAT32.
Once flashing is complete, the receiver should reboot into the original factory state. Insert the USB into the powered-off Starsat 6969HD
while holding the Power button on the front panel (or remote). Release when "UPG" or "Update" appears on the screen. Method B: External Programmer (For "Dead" Boxes)