: Close the canopy while waiting for the APU to cycle up. 2. Engine Startup
: Power on the Radar (set to OPR), RWR , IFF , and Data Link systems. 4. Taxi and Takeoff
: Press the FCS Reset button. Perform the Flight Control System BIT test by holding the FCS BIT switch on the right wall while simultaneously pressing the FCS OSB on the right DDI. dcs_fa_18c_hornet_episode_3_preflight_startup_t...
: Press the Takeoff Trim button and set the flaps switch to HALF .
: Ensure the Oxygen (OBOGS) is on, the Ejection Seat is armed, and the Parking Brake is released. : Close the canopy while waiting for the APU to cycle up
: Move the engine crank switch to RIGHT . Once RPM reaches approximately 25% , move the right throttle to the IDLE detent.
: Use Nose Wheel Steering (NWS) to navigate to the runway. : Press the Takeoff Trim button and set
: Repeat the process by moving the crank switch to LEFT and advancing the left throttle to IDLE at 25% RPM. 3. Systems Initialization