: Place the assembled wire-and-runner base onto the bottom of the seat shell. Align the four holes in the base with the shock mounts.

Typically made of maple or walnut. 4x Screws & Washers: To attach the base to the shell. 4x Screws: To attach the runners to the base. Allen Key/Wrench: Often included in the kit. 2. Step-by-Step Assembly

: Insert the four main screws through the base into the seat shell. Tighten them in a diagonal pattern (like lug nuts on a car tire) to ensure even pressure and prevent the shock mounts from pulling.

: Place the seat shell upside down on a soft surface (like a rug or the shipping box) to prevent scratching. Locate the four circular shock mounts on the bottom.

: The rocking motion can cause screws to loosen over time; check them every few months.

: Most shells can be cleaned with a damp cloth and mild detergent. Avoid abrasive cleaners that might scratch the UV coating. Assembly Instructions Eames Rocking Chair RAR Assembly Instructions Eames Rocking Chair RAR - YouTube. YouTube·Do Mini A Step-by-Step Guide to Assembling Your Office Chair - BOSQ

Tip: Do not tighten completely until both runners are aligned to ensure the chair rocks evenly.

Chair.rar Here

: Place the assembled wire-and-runner base onto the bottom of the seat shell. Align the four holes in the base with the shock mounts.

: Insert the four main screws through the base into the seat shell. Tighten them in a diagonal pattern (like lug nuts on a car tire) to ensure even pressure and prevent the shock mounts from pulling. : Place the assembled wire-and-runner base onto the

: Place the seat shell upside down on a soft surface (like a rug or the shipping box) to prevent scratching. Locate the four circular shock mounts on the bottom. 4x Screws & Washers: To attach the base to the shell

: The rocking motion can cause screws to loosen over time; check them every few months.

Tip: Do not tighten completely until both runners are aligned to ensure the chair rocks evenly.